Need some tips for installing your PVC tiles?
You've come to the right place! Our teams will explain everything you need to know for a perfect floor installation!
Installing PVC tiles: what to do and with what tools?
Installing PVC tiles is quick and easy, and requires little or no preparation.These tiles are designed for the following applications:
- Garage, Workshop, Showroom
- Warehouse, Storage area
- Factory and Clean Room
- Stores
- Sports halls
- Offices
Tools required :
- Rubber mallet
- Cutting equipment: jigsaw or circular saw, cutter
First and foremost, make sure the floor is smooth and straight to facilitate interlocking of the tiles.
It's rare to have to do any patching. The PVC tiles tiles are flexible enough to adapt to many floor irregularities. For a more precise opinion, please contact us and send us photos of the surface.
Clean well.
When the tiles are delivered, they must first be removed from the cartons and left at room temperature for 24 hours. This will allow them to regain their original dimensions, as temperature changes cause expansion and shrinkage.
Once the tiles have been acclimatized, they need to be installed according to our installation instructions.
Cut-outs :
- The tiles are cut using a jigsaw or circular saw. For rounded cuts, a good cutter will do the trick.
- A guillotine is also a very practical tool for large surfaces.
- Leave 5mm to 7mm between tiles and wall
- Allow for an additional surface area of 5% to 10%.
When to glue the tiles?
- If the tiles are exposed to direct sunlight.
- When using a forklift with a single small central wheel
- To choose the right glue: click here
Video to show the speed of an installation:
Installation complete? Don't forget maintenance!
Thanks to its ease of maintenance, the surface is transformed and this hard-wearing coating will last you a good fifteen years. Simply use a mop or scrubber-dryer. We have a product specially designed for cleaning.
These tiles are free-laying. No glue or other fixings are required. Simply fit the PVC floor tiles together like a jigsaw puzzle. This is a great solution for transforming an old, damaged floor, or an old polyurethane or epoxy resin.
✅ This material withstands loads of 50 tonnes/m², so there's no need to worry about vehicles, motorcycles, forklifts, pallet trucks etc. passing through.
✅ AR10 non-slip
✅ CFire rating: Bfl-S1
✅ Made in Europe
✅ 10-year warranty
Still in doubt? We haven't answered all your questions in our article?
Don't hesitate to contact our team of experts, for whom PVC slab installation holds no secrets. We'll be happy to help and advise you.
